Omron NT31C Reference Manual page 220

Recipe
List of Functions
Item
Recipe tables Consist of multiple individual recipe data.
Recipe data
1,000 records max.
( bl d (table data) )
Record
details details
Parameter
Recipe data 200 max., to a memory capacity of 40 Kbytes max.
that can be
registered in
one application
Recipe elements Consist of recipe data display field and special recipe touch
switches.
Recipe data Specify the recipe data used as a recipe element from the
number to be recipe table using its number (a number from 1 to 200 is
used automatically assigned to each recipe data item).
(referenced)
Recipe Normal (standard) screen: 1 max.
elements that Overlapping screen: 8 max.
can be Window screen: Not possible.
registered in
one screen
Transferring When the PT is in transmit mode, you can transfer the
recipe tables and following units from the Support Tool to the PT.
recipe elements
• All screen data (applications): All recipe tables and recipe ele-
ments
• Screen data with recipe data affixed: Recipe elements only
• Recipe table: Recipe tables only
• Set the initial recipe data parameters using the Support Tool.
Setting
parameters
• Press the parameter field in the recipe elements. The parame-
ter field will become an input field, and the specified pop-up win-
dow will be displayed. You can enter the values in the parame-
ters field using the input and confirmation touch switches set in
the window beforehand.
Note You can restore the edited parameters to their initial val-
• Select a record, and then press the Write touch switch to write
Exchanging
record data with
all the parameters for one record to specified consecutive
host words (PC
words on the host.
memory or PT
• Select a record, and then press the Read touch switch to read
memory)
all the parameters for one record from specified consecutive
words on the host.
Note You can select any of the following communications meth-
• You can enable or disable edit operations for each record indi-
Additional
functions
vidually on the PT using the Support Tool.
• You can prohibit all recipe touch switch operations while a spe-
cified host bit is OFF. (Interlock function.)
• When writing to a word in the host is completed, you can send
an operation completed notification using a strobe operation
(OFF→ON→OFF) of a specified bit in the host.
Function
Consists of 200 parameters max.
Numerical data
A touch switch for moving the cursor appears
in the parameter field.
ues set using the Support Tool by using the System Menu
(Maintenance Mode/Memory Init.) on the PT.
ods (serial communications mode) between the PT and
PC: 1:1 NT Link, 1:N NT Link, or host link.
Section 2-14
209