Omron NT31C Reference Manual page 219

Recipe
Outline
Overall Configuration
Transfer screen data containing registered recipe tables and recipe elements.
(1) Recipe tables
1, 2, 3...
208
• After writing to the host, you can send a writing completed notification to the
host using the status notify bits (strobe operation) on the host.
Create (1) recipe tables and (2) recipe elements.
Support Tool
(2) Recipe elements
Screen
Display on the screen
Recipe table title
Record 1 title
Record 2 title
Recipe data
Record 3 title
Edit
• Use the Support Tool to create the following two types of data: (1) Table data
(recipe tables) and (2) Display and setting elements (recipe elements), which
use the recipe tables.
1. Recipe tables: Multiple discrete data in table format (the data is called "rec-
ipe data").
2. Recipe elements: These elements display recipe data on screen, and read
and write data from/to the host. Register and use recipe elements on a
screen. Specify the recipe data to be used by its number, and arrange and
create special recipe touch switches as appropriate.
Note Multiple recipe elements can also share (i.e., reference and use) the
same recipe data.
• Transfer screen data to which recipe elements and recipe tables are registered
from the Support Tool to the PT by application downloading.
• Recipe elements that have been registered on screen read corresponding rec-
ipe data from the PT.
• You can change recipe data parameters by performing the edit operation using
the touch switches on the PT.
• You can read and write recipe data parameters in units of host words or records
using the Read and Write touch switches on the PT.
Parameter 1 Parameter 2 Parameter 3
Value Value
V ue Value
V ue Value
Reading/writing in the unit of record
Leftmost word
Leftmost word+1
Leftmost word+2
Note: Example for data size = 1 word
Section 2-14
PT
Value
Value
Value
PC
Memory
Parameter 1
Parameter 2
Parameter 3