Omron NT31C Reference Manual page 415

Examples of Actual Applications of Memory Link
To know the event that a numeral/character string is input to PT
Example:
1, 2, 3...
406
• Response
[ESC] W
1B 57
• Explanation
Format of response is fixed.
Hint
• In the same way, by changing the status of PT control bit, buzzer can be
beeped or backlight ON/OFF status can be controlled from the host. See page
46.
• By writing the value in window control area, it is possible to control window
(open/close/move). See page 59.
• Use bit memory table write command to switch screens by the operation of bit
memory table. See page 368.
PT
Production
volume 0001
No. of
0005
parts
Numeral input and numeral display
(Input production volume number
of required parts is calculated at
the host
The returned result is displayed)
When the numeral was input on PT, numeral input notify command (sent from PT
to host) is issued from the PT. At the host, numeral data was taken out and pro-
cessed, then it is written to the PT by the numeral memory table write command
(sent from host to PT).
1. When numeral data is input on PT (numeral input notify command sent from
PT to host):
• Command
[ESC] S
1B 53
0 0
30 30
1 9
31 39
(3)
M 0 0
1
4D 38 30 31
Numeral data
Processed data
N 0 1 4
4E 30 31 34
(1)
0 0 0 0
30 30 30 30
(2)
[CR]
0D
Section 5-2
F [CR]
46 0D
Host
2
32
F 0
46 30