Omron NT31C Reference Manual page 225

Recipe
Selected record will be displayed in reverse video.
Recipe table title Parameter 1
Record 1
2 Rec 2 50
Re 3
214
Note Once a record is displayed in reverse video, clear the selection by
pressing the same record name field again, or by pressing the name
field for another record, or by pressing the line scroll touch switches
or page scroll touch switches.
2. Press the Write touch switch to write recipe data parameters to the host.
Press the Read touch switch to read recipe data parameters from the host.
PT
Parameter 2 Parameter 3
250 350
Reading record data
You can also add the following functions.
Enable/Disable Editing On the PT for Each Record Individually
You can enable or disable (i.e., "Lock") the editing operation on the PT for each
record individually using the lock function set with the Support Tool. Use this
function when you want to disable editing (i.e., do not want the values changed
from the initial values) for a specific record. Set lock function for each record to
be locked when creating recipes using the Support Tool.
Press the Write or Read switch to write
selected record to the PC or to read
one from the PC.
Recipe table title Parameter 1 Parameter 2 Parameter 3
Record 1
2 Record 2 50 250 350
Record 3
Writing record data
PC
Leftmost word
Leftmost word+1
Leftmost word+2
Note: Example for data size = 1 word
Records that cannot be edited
Recipe table Parameter 1 Parameter 2
title
Record 1
Record 2
Record 3
Section
PT
CPU Unit
Memory
Parameter 3
2-14