Omron NT31C Reference Manual page 387

Commands/Responses
4-3-13 Character String Memory Table Clear Command
Command
Format
Reference: The maximum number which can be specified for character string memory table
Response
Format
Function
• If settings are omitted for both the first cleared numeral memory table number
and the final cleared numeral memory table number, all the numeral memory
tables are cleared. It is not possible to omit just one of these settings.
• When writing is executed to numeral memory tables from No.247 to No.253
(areas for clock data display/reading use only), operation will be finished nor-
mally without writing values.
[ESC] C
1B 43
(e1)
* *
m : Check sum present/absent (1 BCD digit)
0 : Absent
1 : Present
b to b : First cleared character string memory table number
1 4
(4 BCD digits)
0000 to 0499
e to e : Final cleared character string memory table number
1 4
(4 BCD digits)
0000 to 0499
s , s : Check sum (2 hexadecimal digits)
1 2
When m is 0, omit this setting.
depends on the setting for numbers of character string table entries
(256/1000/2000) made at the Support Tool. However, it is not possible to clear
character string memory table of numbers higher than No.500.
Only if Yes is set for the Response memory switch, the response indicated below
is returned on normal completion.
[ESC] C
1B 43
s , s : Check sum (2 hexadecimal digits)
1 2
This is always added (fixed as 11H).
• Writes 40 characters of space code (20H) to all the character string memory
tables within the specified range.
• If settings are omitted for both the first cleared character string memory table
number and the final cleared character string memory table number, all the
character string memory tables are cleared. It is not possible to omit just one of
these settings.
(Sent from Host to PT)
S m (b1) (b2)
53
* * * * * *
(e2) (e3) (e4) (s1)
* * * * * * * *
S 0 0 s1
53 30 30 31
Section 4-3
(b3) (b4)
* * * *
(s2) [CR]
0D
* *
s2 [CR]
31 0D
377