Omron NT31C Reference Manual page 337

Input of Numeric Values and Character Strings
Reference: For the registration of touch switch input key – control, it is useful to register the
Operation
1, 2, 3...
Reference: If the window open function is set to the cursor moving keys, the specified win-
Reference: The way in which the window is opened differs according to the property set for
326
• ENT or
(necessary for confirming the input)
The following keys can be registered if necessary.
• HOME or ↑, ↓, ←, →,
• CLR
(for clearing the numeric value being input)
• CA
(for canceling the input)
• BS
(for deleting a character located immediately before the input cur-
sor)
• DEL
(for deleting a character located immediately after the input cur-
sor)
• A, "
(for moving the input cursor)
keys which will be required for inputting the data on the base screen, and those
which will be switched according to need during input — such as letters and nu-
merals — in the window.
1. Display a screen on which numeral setting input fields are registered.
2. Specify the objective numeral setting input field using the input key – control
and the cursor moving keys.
For the procedure for specifying the objective numeral setting input field, re-
fer to Specifying the Objective Numeral Setting Input Field Using the Input
Key – Control (page 323).
dow automatically opens.
3. Press the window open key to open the window which is used for inputting a
numeric value.
the window open key (page 125).
4. Input a numeric value using the input key – control.
For the procedure for inputting a numeric value, refer to Inputting Operation
Using Touch Switches (page 320).
5. Press the ENT key in the input key – control or the
When the input is confirmed, the input numeric value is stored to a numeral
memory table. Then, the occurrence of a change in the contents of the nu-
meral memory table is notified to the host via the PT status notify area (page
55).
, (necessary for specifying an input field)
Section 3-7
key to confirm the input.