Nortel Media Gateway 3200 User Manual page 55

H.248 User's Manual
Switch Description
-br BootP retries:
1 = 1 BootP retry, 1 sec
2 = 2 BootP retries, 3 sec
3 = 3 BootP retries, 6 sec
4 = 10 BootP retries, 30 sec
5 = 20 BootP retries, 60 sec
6 = 40 BootP retries, 120 sec
7 = 100 BootP retries, 300 sec
15 = BootP retries indefinitely
Use this switch to set the number of BootP retries that the MG 3200 sends during start-
up. The MG 3200 stops issuing BootP requests when either an AA122BootP reply is
received or Number Of Retries is reached. This switch takes effect only from the next
MG 3200 reset.
-bd BootP delays. 1 = 1 sec (default), 2 = 10 sec, 3 = 30 sec, 4 = 60 sec, 5 = 120 sec. This
sets the delay from the MG 3200's reset until the first BootP request is issued by the
MG 3200. The switch only takes effect from the next reset of the MG 3200.
-bs Selective BootP
Use -be 1 for the MG 3200 to send client information that can be viewed in the main
-be
screen of the BootP/TFTP Server, under column 'Client Info' (refer to Figure A-3, on
page 165, showing BootP/TFTP Server's main screen with the column 'Client Info' on
the extreme right). 'Client Info' can include IP address, number of channels (in the case
of MG 3200' media gateways), which cmp file is burned into the MG 3200's non-volatile
memory, etc.
Note:
Configuration (ini) file name - The ini file is a proprietary configuration file with an ini
extension, containing configuration parameters and tables. For more information on
this file, refer to ''Configuration Parameters and Files'' on page 58. When the MG 3200
detects that this optional parameter field is defined in BootP, it initiates a TFTP
process to load the file into the MG 3200. The new configuration contained in the ini
file can be stored in the MG 3200's integral non-volatile memory. When ever the MG
3200 is reset and no BootP reply is sent to the board or the ini file name is missing in
the BootP reply, the MG 3200 uses the previously stored ini file.
Version SN09
Table 6-1: Command Line Switch Descriptions
After programming a new cmp software image file, all configuration
parameters and tables are erased. Reprogram them by downloading the
ini file.
6. MG 3200 Initialization & Configuration Files
55 October 2006