H.248 User's Manual
For procedures on how to perform trunk maintenance activities using the TMM, refer to the procedure
'Performing Trunk Maintenance using the Trunk Maintenance Manager' in the ATM/IP Solution-level
Fault Management document, NN10408-900.
2.
From the Trunk Maintenance Manager screen, post the trunks:
a. select 'Maintenance By Gateway Name' under the 'Maintenance Action' section.
b. From the 'Gateway Name' pull-down list, select the MG3200 Gateway name
c. Check mark on the 'Show Details' box.
d. From the 'Maintenance Action' pull-down list, select 'Post Endpoints'
e. Click Go
Version SN09
24. Appendix – Disable MG 3200 Traffic Prior to Software Upgrade
407
October 2006