Nortel Media Gateway 3200 User Manual page 202

8.4.6.3.4 Loading the Software Upgrade Key Using the Embedded Web Server
To load a Software Upgrade Key using the Web Server, take these
5 steps:
1. Access the MG 3200's Embedded Web Server (refer to "Accessing the Embedded
Web Server" on page 144).
2. Click the Software Update button.
3. Click the Software Upgrade Key link; the Software Upgrade Key screen is displayed
(shown in the figure, 'Software Upgrade Key Screen' below).
4. When loading a single key S/N line to a MG 3200:
Open the Software Upgrade Key file (it should open in Notepad), select and copy the
key string of the MG 3200's S/N and paste it into the Web field New Key. If the string
is sent in the body of an Email, copy and paste it from there. Press the Add Key
button.
5. When loading a Software Upgrade Key text file containing multiple S/N lines to a
MG 3200:
(Refer to the figure, ''Example of a Software Upgrade Key File Containing Multiple S/N
Lines'' on page 83)
Click the Browse button in the Send "Upgrade Key" file from your computer to the
device field, and navigate to the Software Upgrade Key text file.
Click the Send File button.
The new key is loaded to the MG 3200, validated and if valid is burned to memory. The
new key is displayed in the Current Key field.
Validate the new key by scrolling through the 'Key features:' panel and verifying the
presence / absence of the appropriate features.
6. After verifying that the Software Upgrade Key was successfully loaded, reset the MG
3200; the new capabilities and resources are active.
User's Manual 202
MG 3200
Document # LTRT-72704