Nortel Media Gateway 3200 User Manual page 335

H.248 User's Manual
ini File Field Name (X is the
Trunk)
DPNSSNumRealChannels
DPNSSNumVirtualChannels
18.2.3.1.1 DPNSSBehavior Bits Values
DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bitmask 0x0001
when 1: DPNSS stops repeating SABMR after NL and NT1 limits are exceeded
when 0: DPNSS continues repeating SABMR after NL and NT1 limits are exceeded
Default is 0 (continue repeating SABMR).
DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bitmask 0x0002)
when 1: the startup procedure is considered a SUCCESS only when ALL DLCs
succeed to reset
when 0: the startup procedure is considered a SUCCESS as soon as 1 DLC succeed
to reset
Default is 0: (only partial reset is considered a success).
DPNSS_BEHAV_DLC_OOS_AFTER_NL_AND_NT1 bit: (bit #2, bitmask 0x0004)
(Note: The current implementation is 'the DLC is declared OOS to the MGC after NL
and NT1 limits are exceeded' regardless of bit setting).
DPNSS_BEHAV_DLC_OOS_WHEN_L3_Q_FULL bit: (bit #3, bitmask 0x0008)
(Note: The current implementation is 'the DLC is declared OOS to the MGC when the
L3 queue limit is exceeded' regardless of bit setting).
18.2.3.2 Configuring via the Web Interface
Login to the MG 3200 web server and select "Advanced Configuration" in the left hand
pane. Then select "Trunk Settings" from the top menu. Select the trunk to be configured
by clicking on the appropriate trunk status icon. Select "E1 DUA" as the protocol type and
fill in the remaining fields according to the desired characteristics. See Figure 18-3 Trunk
Settings Configuration Page
Version SN09
18. Appendix - ISDN Signaling Gateway Functionality
Valid Range
Char - Valid range 1-30
Char - Valid range 0-30
335
Description
Number of real B-channels used
for voice. Default = 30.
Number of virtual B-channels
used for services. Default = 30.
October 2006