Nortel Media Gateway 3200 User Manual page 236

ini File Field Name
NATBindingDefaultTimeout
NTPServerIP
NTPServerUTCOffset
NTPUpdateInterval
PrtFileUrl
RedundantBoardIPAddress
ResetNow
SaveConfiguration
SendKeepAliveTrap
STUNServerPrimaryIP
User's Manual
Table 12-1: System Parameters
Description
by ";" sign).
Defines the NAT binding lifetime, in
seconds. STUN refreshes the binding
information after this time expires.
Range = 0 to 2592000
This parameter is used to define the
NTP server's IP address.
Range = Legal IP address
This parameter is used to define the
NTP time to offset, in seconds.
Range = -43200 to + 43200 seconds
This parameter defines the NTP update
interval, in seconds. Do not set it
exceeding 1 month (2592000
seconds).
Range = 0 to 2592000 seconds
Default = 86400 seconds
Links to a prerecorded tones dat file, to
be downloaded from a remote server.
Range = http://server_name/file,
https://server_name/file
Defines the IP address of the
redundant board, to which state DB
packets are sent. Range = Any IP
address
This parameter causes an immediate
restart of the device. The parameter
can be used for configuration files
loaded via IniFileUrl.
Determines if the device configuration
(and the loadable file) is saved in flash.
Choose either:
1 = Save configuration file (the Call
Progress Tones, PRT and/or coefficient
file) in non-volatile memory
0 = Don't save
When Enabled, this parameter invokes
the keep-alive trap and sends it out
every 9/10 of the time defined in the
parameter defining NAT Binding
Default Timeout.
Defines the primary STUN Server IP
236
MG 3200
Host/Manual Valid
Default Value Range
30 See
Descr.
0.0.0.0 See
Descr.
0 See
Descr.
See Descr. See
Descr.
NULL See
Descr.
NULL See
Descr.
0 0 or 1
1 0 or 1
0 -
0.0.0.0 See
Document # LTRT-72704