Nortel Media Gateway 3200 User Manual page 249

H.248 User's Manual
ini File Field Name
ForceExceptionDump
GOLDServiceClassDIFFSERV
HeartbeatDestIP
HeartbeatDestPort
HeartbeatIntervalmsec
HeartbeatSecondaryDestIP
ICMPUnreachableReportInterva
l
INIFileVersion
LocalControlDefaultGW
Version SN09
Table 12-3: Infrastructure Parameters
Description
provide device-related, initial startup
parameters such as board type,
current IP address, software version,
Geographical Address, etc. This is
not available in DHCP.
Forces an exception dump that is
sent every time the board restarts.
0 = Disable; 1 = Enable
Sets the DiffServ for the Gold service
class content.
Sets the destination UDP port to
which the heartbeat packets are sent.
Range = IP address in dotted
notation
xxx.xxx.xxx.xxx
Sets the destination UDP port to
which the heartbeat packets are sent.
Sets the time delay in msec between
consecutive heartbeat packets.
Range = 0x0 to 0xFFFFFFFF
Default = 0xFFFFFFFF
Sets the secondary destination IP
address to which the heartbeat
packets are sent.
Range = IP address in dotted
notation
xxx.xxx.xxx.xxx
Determines:
(a) The time the board ignores
incoming ICMP unreachable packets
from the channel activation time
(b) The time it takes from the last
ICMP unreachable packet until the
board reports ICMP Reachable.
Range = unsigned long
Contains the ini file version number
that is reported in the
acEV_BOARD_STARTED event.
Range = Long integer value.
Defines the default gateway of the
Control when operating in a multiple
IP mode.
249
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
0.0.0.0
See Descr.
0.0.0.0
5000
0.0.0.0
Valid
Range
0 0 or 1
26 0 to 56
See
Descr.
0 0 to 64000
See
Descr.
See
Descr.
See
Descr.
0 See
Descr.
See
Descr.
October 2006