Nortel Media Gateway 3200 User Manual page 235

H.248 User's Manual
ini File Field Name
CptFileUrl
DisableWebConfig
DIsableWebtask
DNSPriServerIP
DNSSecServerIP
EnableParametersMonitoring
EnableSTUN
EnableSyslog
IniFileTemplateUrl
IniFileURL
InitialShellCommand
Version SN09
Table 12-1: System Parameters
Description
Range = tftp://server_ip/file,
http://server_name/file,
https://server_name/file
Links to a Call Progress Tones (CPT)
file to be downloaded from a remote
server.
Range = http://server_name/file,
https://server_name/file
Enables or disables Web Configuration
0 = Read & Write mode (default)
1 = Read Only mode
Enables or disables Web Server Task
0 = Enable (default) 1 = Disable
Defines the DNS primary server's IP
address.
Range = Legal IP address
Defines the DNS secondary server's IP
address.
Range = Legal IP address
enables monitoring of on-the-fly
parameter changes via Syslog
messages.
1 = activate; 0 = deactivate (default)
Enables the STUN module, used for
NAT traversal of UDP packets.
Enables the Syslog protocol log.
1 = Activate; 0 = Deactivate
Links to an ini file to be downloaded
from a remote server, in addition to
IniFileUrl.
Range = http://server_name/file,
https://server_name/file
Link to an ini file to be downloaded
from a remote server.
Range = tftp://server_ip/file,
http://server_name/file,
https://server_name/file
A Command Shell command to be
executed during initialization. Several
commands can be entered (separated
235
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
NULL
0.0.0.0
0.0.0.0
NULL
NULL
NULL
Valid
Range
See
Descr.
0 0 or 1
0 0 or 1
See
Descr.
See
Descr.
0 0 or 1
0 0 or 1
0 0 or 1
See
Descr.
See
Descr.
-
October 2006