Nortel Media Gateway 3200 User Manual page 269

H.248 User's Manual
ini File Field Name
MGCPDefaultCoder
MGCPDefaultPacketizationPeri
od
MGCPDTMFDetectionPoint
MGCPRetransmissionTimeout
MGCPRetransmitionTimeout
ProvisionedCallAgents
ProvisionedCallAgentsPorts
RandomizeTransactionID
Version SN09
Table 12-6: Common Control Parameters
Description
Range: Integer > 0
Refer to the product's User's Manual
or the enumerator mgTMGCPProfile
for possible values.
This parameter can be used to set a
default coder for channel opening. For
the legal coder names, refer to the
product's User Manual.
Default = cpDPT_G711µ-law_Coder
Defines the default packetization
period (Frame Size).
Defines if the detection of DTMF
events is notified at the start or end of
DTMF.
0 = at start of DTMF
1 = at the end of DTMF
Controls protocols retransmission
timeout. Sets the initial time (in msec)
for the first retransmission. The
retransmission intervals thereafter
increase exponentially.
Sets the initial time for the first
retransmission. The Retransmission
intervals thereafter increase
exponentially.
Use this parameter to define a list of
up to 10 (MGCP) or 5 (H.248) legal IP
addresses separated by ',' or ';' for the
ServiceChange command. The
gateway starts connecting with the
first and in case of failure, attempts
the others.
Range: Legal IP Address
Use this parameter to define a list of
up to 10 (MGCP) or 5 (H.248) Call
Agent UDP ports separated by , or ;
for each Call Agent defined by the
parameter used to specify the Allowed
Call Agent Address.
Defines if the transactions produced
by the board start with a fixed or
random number.
1 = Randomize On
Refer also to the parameters defining
269
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
G.711
200
200
NULL
2944
Valid
Range
See
Descr.
20 5 to 120
1 0 or 1
0 to 10000
0 to 65535
See
Descr.
0 to 65535
1 0 or 1
October 2006