Nortel Media Gateway 3200 User Manual page 220

Item
Physical Characteristics
Enclosure Dimensions
Supply Voltages and Power
Consumption (typical)
AC Power Supply
DC Power Supply
Environmental
Hot Swap
Host Interface
LED Indicators
LED Indications on Front Panel
Connectors and Switches
Rear Panel
Front Panel
Type Approvals
Telecommunication Standards
(Chassis and hosted Telecom
boards)
Safety and EMC Standards
User's Manual
Table 10-1: Selected Technical Specifications
Characteristic
1U, 19-inch rack mount, shelf or desk top, 2-slot cPCI chassis
44.5 x 445 x 300 mm; 1.75 x 17.5 x 12 inch (h x w x d)
2 rear mounting flanges - Optional
40.7 W, 3 A at 5 V, 7.8 A at 3.3 V
24 W, 1.5 A at 5 V, 5 A at 3.3 V (120 channels)
Universal 90 to 260 VAC 1A max, 47-63 Hz
Option for a dual redundant power supply.
36 to 72 VDC (nominal 48 VDC), 4A max, floating input.
Operational:
(DC) Short Term (16 hour) 0° to 55° C / 32° to 131° F
Storage:
Humidity:
Full hot swap supported boards
Redundant Power Supplies provide protection but are non Hot
Swappable
Via cPCI bus, using provided libraries
Power, Ready/Fail
T1/E1/J1 per trunk status, LAN statusATM Interface status
Swap ready indication
Power: (model dependent)
- Standard AC power socket
or
- DC power - MSTB2.5/2-STF (5.08mm) of Phoenix Contact
E1/T1 Trunk and Ethernet connectors
Hardware Reset button
IC CS03, FCC part 68 CTR4, CTR12 , CTR13, JATE, TS.016,
TSO, Anatel, Mexico Telecom
UL 60950, FCC part 15 Class B, CE Mark (EN55022, EN60950,
EN55024, EN300 386)
220
0° to 45° C 32° to 113° F
-10° to 70° C 14° to 158° F
10 to 90% non-condensing
MG 3200
Document # LTRT-72704