Nortel Media Gateway 3200 User Manual page 260

ini File Field Name
cketInterval
FaxModemBypassCoderType
FaxModemBypassM
FaxModemRelayVolume
FaxRelayECMEnable
FaxRelayEnhancedRedundancy
Depth
FaxRelayMaxRate
FaxRelayRedundancyDepth
User's Manual
Table 12-4: Media Processing Parameters
Description
RTP packet rate.
0 = Default (set internally)
(PACKET_INTERVAL_DEFAULT)
1 = 5 msec
(PACKET_INTERVAL_5_MSEC)
2 = 10 msec
(PACKET_INTERVAL_10_MSEC)
3 = 20 msec
(PACKET_INTERVAL_20_MSEC)
Sets the fax/modem bypass coder
(according to acTCoders).
0 = G.711 A-law
Defines the number of basic frames
to generate one RTP fax/modem
bypass packet.
Determines the fax gain control. The
range -18 to -3 relates to -18.5 dBm
to -3.5 dBm in steps of 1 dBm.
Enables or disables the using of
ECM mode during Fax Relay.
0 = Disable; 1 = Enable
Number of repetitions to be applied
to control packets when using the
T.38 standard.
4 = Maximum redundancy
Limits the maximum rate at which fax
messages are transmitted.
0 = 2400 bps
1 = 4800 bps
2 = 7200 bps
3 = 9600 bps
4 = 12000 bps
5 = 14400 bps
Determines the depth of redundancy
for fax packets. This parameter is
applicable only to non-V.21 packets.
0 = No redundancy
1 = Include payload of previous
packet
2 = Include payload of previous 2
260
MG 3200
Host/Manual Valid
Default Value Range
0 0 to 64
1 1 or 2
-12 -18 to -3
1 0 or 1
4 0 to 4
5 0 to 5
0 0 to 2
Document # LTRT-72704