Nortel Media Gateway 3200 User Manual page 279

H.248 User's Manual
ini File Field Name
SCTPISTRMNum
SCTPMaxAssocInitAttempts
SCTPMaxAssocRet
SCTPMaxDataChunkSize
SCTPOSTRMNum
SCTPOutChunksNum
SCTPPortsNum
SCTPT4SAckTimer
Version SN09
Table 12-10: SCTP Parameters
Description
empty string, SCTP (Stream Control
Transmission Protocol) uses the value
as the value of the FQDN (Fully
Qualified Domain Name) parameter
attached to the INIT chunk. In this
case, the FQDN parameter replaces
any IP address parameters in the INIT
chunk.
This overcomes NAT problems where
the original IP addresses belonging to
the endpoint supports are converted
into pseudo addresses. When this
parameter is not set (default), the INIT
chunk is sent without any FQDN
parameter.
Range = String[42]
Defines the maximum number of
incoming streams.
Defines the maximum number of SCTP
association initialization attempts.
Defines the maximum number of SCTP
association retransmission attempts.
Defines the maximum length of SCTP
data chunks.
Defines the maximum number of
outgoing streams.
Defines the maximum number of
outgoing chunks.
Defines the maximum number of SCTP
endpoints that can be opened.
Defines the SCTP T4 SACK timer
interval.
279
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
Valid
Range
Descr.
10 1 to 200
5000 5 to
10000
10 5 to 20
500 50 to
1504
10 1 to 200
630 50 to 630
5 1 to 5
3 1 to 5
October 2006