Nortel Media Gateway 3200 User Manual page 268

ini File Field Name
GatewayName
IPDiffServ
IPPrecedence
IPTOS
KeepAliveEnabled
KeepAliveInterval
MGControlProtocolType
MGCPCommunicationLayerTi
meout
MGCPCompatibilityProfile
User's Manual
Table 12-6: Common Control Parameters
Description
H.248: 'line' for analog board and '/c'
for trunking boards
Defines the media gateway's
identification name.
H.248: Prefix of the gateway part of
the termination name.
Range: String[63]
Default:
H.248: NULL for analog boards and
'tgw' for trunking boards
Defines the value of the 'DiffServ' field
in the IP header for media (RTP)
traffic.
Sets the value of the IP precedence
field in the IP header for all packets
generated from the channel.
Sets the value of the parameter
defining IP Type Of Service (TOS) in
the IP header for all packets
generated from this channel.
This parameter can be used to enable
a KeepAlive message (NOP
ServiceChange).
0 = disable; >0 = enable
This parameter is used to define the
interval in seconds of a KeepAlive
message.
Defines the control protocol type.
Choose either:
0 = None
1 = MGCP
2 = H.248
4 = H.323
8 = SIP
This parameter defines the maximal
time to wait for a response before
declaring a disconnection (in
seconds).
Controls H.248 functioning for vendor-
specific compatibility. Refer to the
product's User's Manual.
268
MG 3200
Host/Manual Valid
Default Value Range
See Descr. See
Descr.
0 0 to 63
0 0 to 7
0 0 to 15
0 0 or >0
12 1 to 300
1 0 to 8
30 >0
1 See
Descr.
Document # LTRT-72704