Nortel Media Gateway 3200 User Manual page 261

H.248 User's Manual
ini File Field Name
FaxTransportMode
IBSDetectionRedirection
IdleABCDPattern
IdlePCMPattern
InputGain
LowDSPResourcesEventHyst
LowDSPResourcesEventThresh
old
MaxDTMFDigitsInCIDString
Version SN09
Table 12-4: Media Processing Parameters
Description
packets
Sets the Fax over IP transport
method.
0 = Transparent
1 = Relay
2 = Bypass
3 = Transparent with Events
Determines the IBS (In-Band
Signaling) Detection Direction.
0 = PCM; 1 = Network
Defines the ABCD (CAS) pattern to
be applied on the signaling bus
before it is changed by the user or
the PSTN protocol. This is only
relevant when using PSTN interface
with CAS protocols.
Range = 0x0 to 0xF
Defines the PCM pattern applied to
the E1/T1 timeslot (B-channel) when
the channel is idle.
Default:
0xFF if PCMLawSelect is μ-law
0xD5 if PCMLawSelect is A-law
Range = 0x00 to 0xFF
Defines the PCM input gain. The
range is -32 dB to +31 dB in 1 dB
steps.
Default = No Gain
Determines the space between the
low and hi watermarks of the DSP
resource notifications.
Range = 0 to the maximum number
of DSP channels
Determines when a notification
indicating a 'low number of DSP
resources' is issued.
Range = Between 0 and the
maximum number of DSP channels
Determines the maximum number of
DTMF digits in a DTMF-based Caller
ID string.
261
12. Appendix - Individual ini File Parameters
Host/Manual
Default Value
See Descr.
Valid
Range
1 0 to 3
0 0 or 1
- See
Descr.
See
Descr.
0 -32 to +31
0 See
Descr.
0 See
Descr.
26 0 to 26
October 2006