82 Chapter 6 Contivity 4500 option installation
To remove the front bezel:
1
Insert a flat-head screwdriver into the slots on the lower left and right sides of
the chassis, and pry the bezel forward.
2
Slide your fingers between the front bezel and the gateway.
3
Pull the bezel forward firmly, separating the ball studs on the bezel from the
sockets on the chassis.
Figure 32
not need to turn off the gateway to remove the front bezel.
Figure 32 Removing the Contivity 4500 front bezel
Using a screwdriver
separate ball stud
on bezel from socket
on chassis (4 corners)
302283-K Rev 00
shows you how to remove the front bezel from the gateway. You do