Figure 4 Removing The Blank Bracket From The Option Card Slot - Nortel Contivity 600 Installing

4
Remove the blank PCI bracket by inserting a Phillips screwdriver into the slot
at the right of the blank PCI bracket and rotating the screw counterclockwise
(Figure 4).

Figure 4 Removing the blank bracket from the option card slot

Option card slot
Motherboard
5
Slide the option card into the option card slot
Note: Be careful not to bend the copper fingers in the slot.
Installing Hardware Options for the Contivity Secure IP Services Gateway
Chapter 1 Contivity 600 option installation 29
Blank PCI bracket
(Figure
Phillips screwdriver
Screwdriver
slot
CS60010A
5).