Table of Contents
Advertisement
7
Insert the replacement hard drive into the chassis and push it all the way into
the chassis.
8
Insert the hard disk drive key into the lock and turn the key left
Make sure that the hard disk drive LED displays the drive number.
Figure 58 Inserting a hard disk drive
1
9
Replace the front bezel (see
a
Hold the bezel by its two handles and push it onto the chassis.
b Using the screwdriver, tighten the 2 screws to secure the bezel to the
chassis.
10 If you shut down the gateway before you replaced the hard disk drive, press
and release the power switch on the rear of the Contivity 5000 and wait for the
gateway to boot.
11 Use your Web browser to navigate to the Contivity 5000.
12 Go to the Admin > File System screen and select the new disk drive from the
Devices list.
13 Click on the Enable button.
Installing Hardware Options for the Contivity Secure IP Services Gateway
Chapter 8 Contivity 5000 option installation 125
2
Figure 51 on page
(Figure
11011FA
116).
58).
Advertisement
Table of Contents
