Installing And Replacing Dimms; Figure 16 Replacing The Front Bezel - Nortel Contivity 600 Installing

11 Replace the front bezel
a
b Using a screwdriver, tighten the 2 screws to secure the bezel to the

Figure 16 Replacing the front bezel

Installing and replacing DIMMs

The Contivity 1700 and 1600 have two slots for dual inline memory modules
(DIMMs) (see
gateway is shipped with one 128 MB DIMM installed. You can upgrade memory
in the gateway by installing a second 128 MB DIMM.
This section provides instructions on adding a second DIMM to the gateway or, if
necessary, replacing an existing DIMM.
Chapter 3 Contivity 1700 and 1600 option installation 49
(Figure
Hold the bezel by its two handles and push it onto the chassis.
chassis.
Press here
Figure 12 on page
Caution: Make sure to install the same type of DIMM that is already
installed in your gateway. For example, do not install a 256 MB DIMM
in the Contivity 1700 or 1600.
Installing Hardware Options for the Contivity Secure IP Services Gateway
16).
43). Unless you ordered additional memory, the
CS160015A