Adding Or Replacing A Power Supply; Adding A Second Power Supply - Nortel Passport 5430 Installing And Operating Instructions

This chapter describes how to add a second power supply or replace a power
supply in the Passport 5430, as follows:
Topic

Adding a Second Power Supply

Replacing a Power Supply
Where to Go Next
Adding a Second Power Supply
To add a power supply:
1.
Caution: Electrostatic discharge can damage hardware. You must wear the
antistatic wrist strap on your arm whenever you handle printed circuit boards.
2.
Caution: Save the power supply filler panel in case you need to operate the
Passport 5430 with a power supply removed.
306308-A Rev 00

Adding or Replacing a Power Supply

Put on an antistatic wrist strap.
For instructions, see "Attaching the Antistatic Wrist Strap" on page 3-2.
Remove the power supply filler panel.
For instructions, see "Removing and Installing a Power Supply Filler Panel"
on page 3-10.
Chapter 11
Page
11-1
11-3
11-4
11-1