Installing And Replacing Option Cards; Table 4 Supported Option Cards For The Contivity 1740 - Nortel Contivity 600 Installing

Hardware options for the contivity secure ip services gateway
Hide thumbs Also See for Contivity 600:
Table of Contents

Advertisement

Installing and replacing option cards

The Contivity 1740 has four slots for option cards (see
This section provides instructions on adding new option cards to the Contivity
1740 or, if necessary, replacing an existing card.
Table 4

Table 4 Supported option cards for the Contivity 1740

Option card
Contivity Security Accelerator (CSA)
Hardware Accelerator
10/100 Ethernet interface
1000BASE-T interface (copper)
1000BASE-SX interface (fiber)
ADSL WAN interface
ISDN BRI S/T or U interface
T1/E1 CSU/DSU WAN interface
Quad T1/E1 CSU/DSU WAN interface
V.90 modem interface
Single V.35/X.21 WAN interface
Dual V.35 WAN interface
HSSI WAN interface
1 The Contivity 1740 must be running Version 4.90 or later.
2 The Contivity 1740 must be running Version 4.80 or later.
3 This option card is no longer available for purchase.
lists the option cards that you can install in the Contivity 1740.
1
1
2
2
3
Installing Hardware Options for the Contivity Secure IP Services Gateway
Chapter 4 Contivity 1740 option installation 59
Maximum
number
1
1
1
4
2
1
2
4
4
4
1
3
4
4
4
2
Figure 20 on page
Restrictions
Install one CSA or one Hardware
Accelerator card. Do not install
either card in slot 4.
Install two 1000BASE-T cards,
two 1000BASE-SX cards, or one
card of each type.
Do not install in slot 4. Install in
slot 1 or slot 3 if possible.
57).

Advertisement

Table of Contents
loading

Table of Contents