Table of Contents
Advertisement
Chapter 3
Contivity 1700 and 1600 option installation
This chapter provides instructions on how to install and replace the following field
replaceable units (FRUs) in the Contivity 1700 and the Contivity 1600:
•
•
•
This chapter contains the following topics:
Topic
Shutting down the system to add or replace hardware
Removing the front bezel and top cover
Attaching the antistatic wrist strap
Installing and replacing option cards
Installing and replacing DIMMs
LAN, WAN, and serial interface cards
Hardware encryption accelerator card (Contivity 1700 only)
Dual inline memory modules (DIMMs)
Note: The Contivity 1700 and the Contivity 1600 look very similar. The
differences in these gateways are small enough so that a figure of one
gateway—for example, the Contivity 1700—can represent the Contivity
1600 for the purposes of this chapter.
Installing Hardware Options for the Contivity Secure IP Services Gateway
39
Page
40
41
44
45
49
Advertisement
Table of Contents
