Connecting To The Callpilot Modem - Nortel CallPilot Mini Installation And Maintenance Manual

70 Modem Access
After your computer finishes restarting, the modem is ready to connect to the CallPilot modem.
Note: You need to set the modem back to normal mode if you want to connect to
a system other then the CallPilot. For information about how to set the modem
back to normal mode, refer to
connections" on page

Connecting to the CallPilot modem

To connect to the CallPilot system:
1 Use the Start menu to open the Dial-Up Networking window.
2
From the Advanced menu, select Operator-Assisted Dialing.
If a check mark appears beside Operator-Assisted Dialing, this option is already selected.
3
Double click the Dial-Up Networking connection you created for the CallPilot system.
4
Set the User Name to CallPilot.
5
Set the Password to administrator.
6
If there is a Domain box, set the Domain to the IP address you entered for the Dial-Up
Networking TCP/IP parameters of this connection. For example, enter 192.168.0.2.
7 Click the Dial button.
The Operator-Assisted or Manual Dial dialog box appears.
8 Use the telephone connected to your computer modem to dial the CallPilot system you want to
access. You must be answered by the CallPilot voicemail.
9 When voicemail answers, log into the administrators mailbox using the Modem Access
password. To do this, press •• , the System Administrator mailbox number, the Modem
Access password and then £ .
For example, ••⁄Øؤ⁄⁄⁄⁄£.
Note: If you are in Europe or Australia, press °° , the System Administrator
mailbox number the Modem Access password and then £ .
For example, °°⁄Øؤ⁄⁄⁄⁄£ .
10 If there are enough CallPilot resources to make a modem connection, the system starts
counting down from 5.
P0604219 03
"Configuring your modem for normal modem
72.