Callpilot Mini Leds; Table 3 Leds During Startup; Table 4 Leds During Operation - Nortel CallPilot Mini Installation And Maintenance Manual

Nortel callpilot mini voice messaging: user guide
Hide thumbs Also See for CallPilot Mini:
Table of Contents

Advertisement

26
Chapter 4 Installing CallPilot Mini

CallPilot Mini LEDs

When the CallPilot Mini starts up, the LEDs change to indicate where the CallPilot Mini is in the
start up process.
indicates.

Table 3 LEDs during startup

LEDs
When the CallPilot Mini is operating, the LEDs indicate the operating status of the CallPilot
interfaces.
Table 4

Table 4 LEDs during operation

LED
Description
LED lights when TCM channel 4 is
4
connected to the telephone system.
LED lights when TCM channel 3 is
3
connected to the telephone system.
LED lights when TCM channel 2 is
2
connected to the telephone system.
LED lights when TCM channel 1 is
1
connected to the telephone system.
Note: If the LAN interface is disabled when you startup CallPilot Mini, the
LED lights immediately, not after the CallPilot Mini is operating.
P0604219 03
Table 3
shows the order in which the LEDs change and describes what each state
Description
1,
2,
1,
2,
1,
2,
at a time starting with
continue to cycle on and off in this
order.
1,
2,
order until all of the LEDs are on. The
LEDs then turn off in the same order.
The LEDs continue to cycle on and off
.
in this order.
1,
2,
describes the purpose of the LEDs.
3 and
4 turn on.
3 and
4 turn off.
3 and
4 turn on one
1. The LEDs
3 and
4 turn on in
3 and
4 turn off.
LED
Description
LED lights when the Ethernet
connection is operating at 100 Mbit/s
and blinks with Ethernet activity.
LED lights when the CallPilot Mini is
operating.
LED lights when an Ethernet
connection is detected.
Not used in this version of CallPilot
Mini.
Indicates
Power is connected to the
CallPilot Mini and the RAM test is in
progress.
RAM test complete.
The CallPilot Mini is being upgraded.
Note: This sequence does not appear
every time you restart CallPilot Mini.
The CallPilot Mini is booting up.
The CallPilot Mini has finished
booting up.
Note: The LEDs then light to indicate
TCM connections as described in
Table
4.

Advertisement

Table of Contents
loading

Table of Contents