Managing The Callpilot System; Using A Lan; Dns Server - Nortel CallPilot Mini Installation And Maintenance Manual

Nortel callpilot mini voice messaging: user guide

Hide thumbs Also See for CallPilot Mini:

Table of Contents

Chapter 3 Preparing to install the CallPilot Mini

Managing the CallPilot system

CallPilot Mini is managed using CallPilot Manager. You require a LAN connection to the

CallPilot Mini to use CallPilot Manager.

CallPilot Mini is managed through a web browser interface called CallPilot Manager.

To use CallPilot Manager, the CallPilot Mini system must have a fixed IP address.

All CallPilot Mini systems are shipped with the default IP address of 192.168.110.10. If this IP

address conflicts with your network, you must change the address before connecting the CallPilot

Mini to your network. You ca-n change the IP address using a terminal connected to the CallPilot

Mini serial port, or through a temporary Ethernet connection using an Ethernet crossover cable to a

stand alone computer or laptop.

Detailed instructions for setting the IP address and accessing CallPilot Manager are provided in

"Initializing the CallPilot Mini" on page

Your LAN does not require a DNS server for CallPilot Mini to operate. However, a DNS server

provides an easier interface to accessing the CallPilot Manager URL by providing a

language-based name, such as CallPilot01. After this name is added to the DNS server as an alias

for the system IP address, users can start CallPilot Manager by entering this name.

P0604219 03

27.

Table of Contents