Enabling The Call Forward On Busy Message; Scheduled Block (Scb); Table 8 Assigning Acd Agents - Nortel CallPilot Mini Installation And Maintenance Manual

32 Chapter 5 Initializing the CallPilot Mini

Enabling the Call Forward on Busy message

When a caller dials a CallPilot Mini user that is busy on another call, the caller is forwarded to the
user's mailbox. The caller will also hear a message stating that the user is on the phone, if you
ensure that the Hunt prompt in LD 95 is set to B.
All of the steps below are performed on the Meridian 1 PBX using a terminal connection.
1 At the main prompt type, LD 95.
2 Respond to the prompts according to
Note: For any of the prompts not listed in the table below, press the Enter key to
accept the default or current value.

Table 8 Assigning ACD Agents

Prompt
REQ
TYPE
HUNT

Scheduled Block (SCB)

Do not configure the Scheduled Block feature on the Meridian 1 PBX.
P0604219 03
Response Comment
NEW
CPND
B This is the default value for this prompt.
Table 8.