Configuring Your Modem For Normal Modem Connections - Nortel CallPilot Mini Installation And Maintenance Manual

72 Modem Access
Accessing the CallPilot system using CallPilot Manager
1 Start your web browser.
2 In the URL field, enter http://<CallPilot IP Address>.
3 Log on to CallPilot Manager.
When you are finished with the CallPilot system, end your connection to the CallPilot modem.
Note: After you are finished accessing the CallPilot system, you must reconfigure your
modem if you want to use it for normal modem connections. This requires a reboot of your
PC.

Configuring your modem for normal modem connections

To configure your modem for normal connections:
1
Open the folder that contains the Nortel Networks Modem Configuration Utility
(CPsecureModem.exe).
2
Double click CPsecureModem.exe.
The Modem Configuration Utility opens.
3
Select the Configure Modem for Normal Operation option.
4 Click the OK button.
5 If you are using Windows NT 4.0, Windows 2000 or Windows XP, restart your computer.
After your computer finishes restarting, the modem is ready for normal modem connections.
P0604219 03