Connecting To The Callpilot Mini - Nortel CallPilot Mini Quick Start Manual

Computer requirements for CallPilot Manager
You access CallPilot Manager using a web browser on a computer that is connected to the
CallPilot Mini.
• The computer you use to access CallPilot Manager must be compatible with Microsoft
Windows ® and capable of running your web browser.
• To use CallPilot Manager, you must have one of the following browsers:
— Netscape Communicator
— Microsoft Internet Explorer
Note: CallPilot Manager does not support Netscape 6.0.

Connecting to the CallPilot Mini

To connect to the CallPilot Mini, you need the IP address of the CallPilot Mini and a connection to
the network that the CallPilot Mini is on.
The default IP address for CallPilot Mini is 192.168.110.10.
If you can use the default IP address
If the default IP address is compatible with your network, connect the LAN cable to the Ethernet
port on the CallPilot Mini and proceed to
Note: If you are unsure if the default IP address is compatible, contact your network
administrator.
If you cannot use the default IP address
If the default IP address is not compatible, you must change the IP address before you connect the
CallPilot Mini to the network. You can change the IP address using a serial cable or an Ethernet
crossover cable (direct PC connection).
1 Netscape is a registered trademark and Communicator is a trademark of Netscape Communications
Corporation.
2 Microsoft and Windows are registered trademarks and Internet Explorer is a trademark of Microsoft
Corporation.
4.5 or later
1
2 4.0 or later
"Running the Quick Install Wizard" on page
Initializing the CallPilot Mini
12.
CallPilot Mini Quick Start Guide
9
®