Table 11 Enable Digit Conversion For Required Did Trunk Routes - Nortel CallPilot Mini Installation And Maintenance Manual

6 Respond to the prompts according to

Table 11 Enable digit conversion for required DID trunk routes

Prompt Response
REQ CHG
TYPE RDB
CUST 0-99
0-31
ROUT 0-511
0-127
IDC YES
- DCNO 0-254
- NDNO 0-254
- DEXT (NO) YES
Print Route Data Block (for DID Route) - Overlay 21
REQ prt
TYPE rdb
CUST 0
ROUT 1
TYPE RDB
CUST 00
DMOD
ROUT 1
DES DMS
TKTP DID
.
.
.
.
IDC YES
DCNO 0
NDNO 0 *
DEXT NO
Chapter 5 Initializing the CallPilot Mini
Table 11.
Comment
Change
Route Data Block
Customer number as defined in LD 15
For Option 11C
Route number
For Option 11C
Use digit conversion for this route
IDC tree number
IDC conversion table for Night mode
(Do not) Allow Digit Display
CallPilot Mini Installation and Maintenance Guide
35