Enabling the CallPilot modem
You must enable the CallPilot modem before you access the system using the modem.
Enabling Modem access using CallPilot Manager
1
Log on to CallPilot Manager.
2
Click the Configuration heading.
3
Click the Access Passwords link.
4
Enter a password in the Modem Access box.
5
Enter the password again in the Confirmation box.
6
Click the Submit button.
Note: To disable Modem access, clear the Modem Access and Confirmation boxes and
then click the Submit button.
Connecting to the CallPilot system
To connect to the CallPilot system you must:
•
configure your modem to access the CallPilot modem
•
connect to the CallPilot modem
Configuring your modem to access the CallPilot modem
The CallPilot modem requires a special configuration for access. This requirement helps prevent
unauthorized access to the CallPilot system.
To configure your modem:
1
Open the folder that contains the Nortel Networks Modem Configuration Utility.
(CPsecureModem.exe).
2
Double click CPsecureModem.exe.
The Modem Configuration Utility opens. The current setting of the Modem appears at the
bottom of the dialog window.
3
Select the Configure Modem for Secure Access option.
4
Click the OK button.
5
In you are using Windows NT 4.0, Windows 2000 or Windows XP, restart your computer.
CallPilot Mini Installation and Maintenance Guide
Modem Access
69