Restoring The Callpilot Information - Nortel CallPilot Mini Installation And Maintenance Manual

10 Click the Backup option.
11 In the Local Folder box, enter the path name of the directory on your computer in which you
want to store the CallPilot information.
12 In the CallPilot Mini hostname or IP addresses box, enter the host name or IP address of the
CallPilot Mini you want to backup.
13 Click the OK button.
A confirmation dialog box appears.
14 If the information on the confirmation dialog is correct, click the Continue button.
If the information is not correct, click the Cancel button and repeat steps 10 to 12.
A dialog box appears when the backup is completed.
15 Click the Continue button.
16 Reboot the CallPilot Mini.

Restoring the CallPilot information

If your CallPilot Mini has been replaced or has lost its programming information, you can restore
the CallPilot programming, greetings and voice messages from a previous back up.
Note: You must have a back up of the CallPilot information stored on your computer to
perform a restore.
You must install the CallPilot Backup and Restore Utility on the computer you are using to
restore the CallPilot information.
Caution: Do not use CallPilot Manager to perform any administrative tasks while a
restore is in progress. If you use CallPilot Manager to make a change during a restore, the
CallPilot Mini can become corrupted and inoperable.
To help prevent other people from making changes during a restore, inform anyone with
administrative privileges that you are doing a restore and that they should not access
CallPilot Manager until the restore is completed.
Chapter 8 Backing up and restoring CallPilot
CallPilot Mini Installation and Maintenance Guide
51