Chapter 5
Initializing the CallPilot Mini
After you install and power up the CallPilot Mini, you need to initialize it. Initializing the CallPilot
Mini sets the system parameters to their default settings and sets some global parameters. When
the initialization is completed, the CallPilot Mini is operational and ready for you to begin
administration programming. Refer to
that provide information about administration programming.
You initialize CallPilot Mini using CallPilot Manager.
About CallPilot Manager
CallPilot Manager is an application that you access from a web browser, such as Netscape
Communicator
Note: The online Help for CallPilot Manager is best viewed in Internet Explorer.
There can be some page format inconsistencies if you use other browsers.
To use CallPilot Manager, you must have a network connection to the CallPilot Mini or an
Ethernet crossover cable.
1
Netscape is a registered trademark and Communicator is a trademark of Netscape Communications
Corporation.
2
Microsoft and Windows are registered trademarks and Internet Explorer is a trademark of Microsoft
Corporation.
or Microsoft
Internet Explorer
1
®
"Related publications" on page 11
.
2
CallPilot Mini Installation and Maintenance Guide
for a list of documents
®