Hardware Overview; Data Connectors; Figure 1 Inside The Callpilot Mini - Nortel CallPilot Mini Installation And Maintenance Manual

18 Chapter 2 System overview

Hardware overview

The CallPilot Mini is a compact device that you can mount on a desk or on the wall.
Figure 1 points out the various parts of the CallPilot hardware.

Data connectors

The CallPilot Mini has the following connections:
• one RJ-45 jack for a 10/100 Mbps Ethernet connection to a local network
• one RS-232 port for connecting a terminal which provides alternative access
• two RJ-11 jacks, labeled Port A and Port B, for connections to a Meridian 1 PBX.
Each RJ-11 jack can support two TCM connections. Each TCM connection can support two
voice channels. This gives the CallPilot Mini a total of eight voice channels.

Figure 1 Inside the CallPilot Mini

P0604219 03
Cable entry slot
Cable trough
Power 9V DC
Port A TCM 1, 3
Port B TCM 2, 4
Ethernet port
Serial port
Status indicator lights
Top PCMCIA slot
Bottom PCMCIA slot