Battery Menu - SATO PW208NX Operator's Manual

Starting Up the Printer

2.6.3 Battery Menu

In the Battery menu, the setting items are as follows:
Battery
1 Health
2 Cycle Counts
3 Eco Charge
4 Full Charge P-Off
Battery condition (Health)
Good : Battery is in a good condition for use.
Replace : Battery is in a condition that requires replacement.
Poor : Battery is deteriorated and in a condition that requires replacement.
Eco Charge
Battery > Eco Charge
Set up the Eco Charge function.
The Eco Charge function is designed to extend the battery life by keeping the after-
charged volume of the battery a little lower than the fully charged volume, thus
delaying the degree of deterioration.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled : Enable the Eco Charge function.
Disabled : Disable the Eco Charge function.
Note
When using the printer being set on the charging cradle, Enabled is
recommended.
88
Mobile printer PW208NX/PW208mNX
Shows the battery condition.
The condition is displayed with Good, Replace
and Poor.
You cannot change the setting.
Shows the cycle count (charge/discharge cycle).
You cannot change the setting.
Set up the Eco Charge function.
Set up the printerʼs power-off function after
charging is complete.