Canon PIXMA MG4200 Series On-Screen Manual page 949

Home > Printing > Using Web Service Printing
U009
Settings for Web Service
This section describes the machine's settings for web service.
Registering the Account on Photo Sharing Site
Resetting the Web Service Settings
Before using the web service, see the terms of service.
Notice for Web Service Printing
Registering the Account on Photo Sharing Site
Register the account on the photo sharing site to the machine following the procedure below.
Important
LAN connection with the machine and internet connection are required to use this function.
Internet connection fees apply.
Before you register the account to the machine, you have to get the account on the photo
sharing site. For getting the account, refer to the photo sharing site.
You can register the login name or e-mail address up to 256 characters and register the
password up to 80 characters. When you get the account on the photo sharing site, set the
login name or e-mail address within 256 characters and set the password within 80 characters.
Set the login name, e-mail address, and password in letters and figures can be entered on the
LCD of the machine.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Select Web service on the HOME screen.
LCD and Operation Panel
3.
Select Web service setup, then press the OK button.
4.
Use the button to select Online Album connection setup, then press the OK button.
5.
Use the button to select Register account, then press the OK button.
Note
When you delete the account, select Delete account, then press the OK button. After
selecting the photo sharing site to delete the account and pressing the OK button, the
confirmation screen to delete the account is displayed. To delete the account, select Yes
and press the OK button.
6.
Use the button to select the photo sharing site to register the account, then press
the OK button.
The message for account information is displayed.
> Settings for Web Service