Canon PIXMA MG4200 Series On-Screen Manual page 823

Home > Copying > Copying Two Pages to Fit onto a Single Page
U040
Copying Two Pages to Fit onto a Single Page
When you select 2-on-1 copy for Layout in Standard copy, you can copy two original pages onto a single
sheet of paper by reducing each image.
Press the right Function button on the Copy standby screen to display the print settings screen, then
select 2-on-1 copy for Layout.
Press the right Function button to specify the advanced layout. You can also use this function with
Orientation setting.
When Portrait is selected for Orientation
2-on-1 copy layout: Left to right
When Landscp. is selected for Orientation
2-on-1 copy layout: Top to bottom
After selecting the layout and press the OK button, you can select whether you use the preview screen. If
you select ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the
print quality to Standard, then try copying again. If the problem is not resolved, set the print quality to
Fast and try copying again.
This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy four original pages on one sheet of paper. In this
case, two original pages are copied on each side of paper.
If you use this function in combination, select 2-sided for 2-sidedPrintSetting, then select the
stapling side of print paper on the Print settings screen.
For details on two-sided copy function:
Two-Sided Copying
When checking the orientation:
2-on-1 copy layout: Right to left
2-on-1 copy layout: Bottom to top