Canon PIXMA MG4200 Series On-Screen Manual page 722

See "Gutter Shadow
Correct slanted text document
Detects the scanned text and corrects the angle (within -0.1 to -10 degrees or +0.1 to +10
degrees) of the document.
Important
The following types of documents may not be corrected properly since the text cannot be
detected correctly.
- Documents in which the text lines are inclined more than 10 degrees or the angles vary by
line
- Documents containing both vertical and horizontal text
- Documents with extremely large or small fonts
- Documents with small amount of text
- Documents containing figures/images
- Hand-written text
- Documents containing both vertical and horizontal lines (tables)
Note
Scanning takes longer than usual when you enable Correct slanted text document.
Detect the orientation of text document and rotate image
Automatically rotates the image to the correct orientation by detecting the orientation of text in the
scanned document.
Important
Only text documents written in languages that can be selected from Document Language in
the Settings (General Settings) dialog are supported.
Settings (General Settings) Dialog
The orientation may not be detected for the following types of settings or documents since
the text cannot be detected correctly.
- Resolution is outside the range of 300 dpi to 600 dpi
- Font size is outside the range of 8 points to 48 points
- Documents containing special fonts, effects, italics, or hand-written text
- Documents with patterned backgrounds
In that case, select the Check scan results checkbox and rotate the image in the Save
Settings dialog.
Save Settings Dialog
When Select Source is Auto
Apply recommended image correction
Applies suitable corrections automatically based on the item type.
Important
The color tone may differ from the source image due to corrections. In that case, deselect
the checkbox and scan.
Note
Scanning takes longer than usual when you enable this function.
(2) Save Settings Area
File Name
Enter the file name of the image to be saved. The date and 4 digits are appended to the set file name
in the "_20XX0101_0001" format.
Correction" for details.