Canon PIXMA MG4200 Series On-Screen Manual page 773

Home > Troubleshooting > Problems with Scanning
Does Not Start
S601
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the ScanGear (scanner driver) is installed.
If not installed, install the ScanGear (scanner driver) using the Setup CD-ROM.
Check 2: Select your scanner or printer on the application's menu.
Note
The operation may differ depending on the application.
Check 3: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear from applications not supporting TWAIN.
Check 4: Scan and save images with IJ Scan Utility and set to open the
files in your application.
The application in which to display scanned images can be set in Application Settings of IJ Scan Utility.
Settings (Auto Scan) Dialog
Settings (Photo Scan) Dialog
Settings (Document Scan) Dialog
Settings (Custom Scan) Dialog
Settings (Scan and Stitch) Dialog
Settings (ScanGear) Dialog
> Problems with Scanning > ScanGear (Scanner Driver)
Page top