Home
>
Scanning
>
Scanning with Using the Operation Panel of the Machine
Commands from the Operation Panel Using IJ Scan Utility
S500
Selecting a Response to Commands from the Operation Panel
Using IJ Scan Utility
IJ Scan Utility allows you to specify how to respond when scanning from the operation panel.
Note
The screens for specifying the responses when performing Auto Scan from the operation panel are
used as examples in the following descriptions.
1.
Start IJ Scan Utility.
Starting IJ Scan Utility
2.
Click Settings....
The Settings dialog appears.
3.
Select a scan mode on the
(Scanning from the operation panel) tab.
> Selecting a Response to