Canon PIXMA MG4200 Series On-Screen Manual page 478

Home > Overview of the Machine
Settings > Initializing the Network Settings of the Machine
N019
Initializing the Network Settings of the Machine
Important
Note that initialization erases all network settings on the machine, and printing or scanning operation
from a computer over network may become impossible. To use the machine over network, setup with
the Setup CD-ROM.
1.
Start up IJ Network Tool.
Starting up IJ Network Tool
2.
Select the printer in Printers:.
3.
Select Maintenance from the Settings: menu.
1. Setting Initialization
Initialize
Reverts all the network settings of the printer to factory default.
4.
Click Initialize.
The Setting Initialization screen is displayed.
Click OK to initialize the network settings of the printer. Do not turn off the printer during initialization.
Click OK when initialization is complete.
Performing initialization when connected over wireless LAN will break the connection, so setup with
the Setup CD-ROM.
Note
You can change the network settings of the printer using IJ Network Tool with USB connection after
initializing the LAN settings. To change the network settings using IJ Network Tool, activate LAN in
Device settings in advance.
> About Network Communication > Changing and Confirming Network
Page top