Canon PIXMA MG4200 Series On-Screen Manual page 643

Home > Scanning > Scanning from a Computer
(ScanGear) > ScanGear (Scanner Driver) Screens
S926
Input Settings
Input Settings allows you to set the following items:
Select Source
The type of document to be scanned is displayed.
Paper Size
Select the size of the document to be scanned. This setting is available in whole image view only.
When you select a size, the Preview area size changes accordingly.
Important
Some applications have a limit to the amount of scan data they can receive. Available scan range is
as follows.
- 21000 pixels x 30000 pixels or less
If you change Paper Size after previewing, the preview image will be deleted.
Note
If you are not sure which size you should select for Paper Size, set Paper Size to Full Platen, then
measure the size of the document and enter the values into
Color Mode
Select how to scan the document.
Color
Select this mode to scan color documents or to create color images. This mode renders the image in
> Scanning with Application Software that You are Using
> Input Settings
(Width) and (Height).