Canon PIXMA MG4200 Series On-Screen Manual page 868

Home > Scanning > Scanning with Using the Operation Panel of the Machine
the Computer Using the Operation Panel of the Machine
U051
Forwarding Scanned Data to the Computer Using the
Operation Panel of the Machine
You can forward the scanned data to the computer using the operation panel of the machine.
Before forwarding scanned data to the computer, confirm the following:
ScanGear (scanner driver) is installed.
If ScanGear (scanner driver) is not yet installed, insert the Setup CD-ROM into the computer's disc
drive, then install ScanGear (scanner driver).
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in
the sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified.
Network Scan Settings
The destination and the file name are specified in Canon IJ Scan Utility.
You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:
Settings Dialog
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Select Scan on the HOME screen.
LCD and Operation Panel
If you forward the data to the USB-connected computer:
The Scan standby screen is displayed.
Go to step 3.
Note
> Forwarding Scanned Data to