Canon PIXMA MG4200 Series On-Screen Manual page 618

Home > Scanning > Scanning from a Computer
(ScanGear) > Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Mode
S904
Scanning in Advanced Mode
Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone,
etc. when scanning.
See "Scanning Multiple Documents at One Time with ScanGear (Scanner
documents at one time.
Important
The following types of documents may not be scanned correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish background
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents may not be scanned correctly.
- Documents smaller than 1.2 inches (3 cm) square
- Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Items (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Click the Advanced Mode tab.
The tab switches to Advanced Mode.
Note
> Scanning with Application Software that You are Using
Driver)" to scan multiple
> Scanning in Advanced
(Thumbnail)