Canon PIXMA MG4200 Series On-Screen Manual page 448

Home > Overview of the Machine
> Initial Values Set at Factory (Network)
N003
Initial Values Set at Factory (Network)
WLAN active/inactive
SSID
Communication mode
Wireless LAN security
IPv4 address
IPv6 address
Set printer name*
TCP/IP settings
Set memory card sharing
Enable/disable WSD
Timeout setting
Enable/disable Bonjour
Service name
LPR protocol setting
Wireless LAN DRX setting
("XX" represents alphanumeric characters.)
* The initial value in this item varies by machine. You can check the value in this item using the operation
panel on the machine.
LAN settings
> About Network Communication
Item
> Appendix for Network Communication
Initial Values
Wireless LAN active
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
IPv4/IPv6
Enable
Enable
1 minute
Enable
Canon MG4200 series
Enable
Enable
Page top