Canon PIXMA MG4200 Series On-Screen Manual page 940

Home > Troubleshooting > Problems with Printing > Cannot Print Properly with Automatic Duplex Printing
U332
Cannot Print Properly with Automatic Duplex Printing
Check 1: Is the setting for automatic duplex printing selected?
Make sure that the Duplex Printing check is selected for Duplex Printing & Margin on the Print
dialog.
Duplex Printing
Check 2: Make sure that the actual size of the paper is suitable for
automatic duplex printing.
The sizes of media suitable for automatic duplex printing are A4 and Letter.
Load paper of suitable size, then press the OK button on the machine.
Check 3: Make sure that the paper size setting is correct.
Make sure that the paper size setting matches the actual size of the paper with a size suitable for
automatic duplex printing.
First, check the paper size setting in the application software you are printing from.
Then, check the Paper Size on the Page Setup dialog.
Note
Duplex printing may not be available depending on the version of the application software.
Check 4: Make sure that the media type setting is correct.
Make sure that the media type setting matches the actual size of the paper with a size suitable for
automatic duplex printing.
Make sure that the type of loaded paper is suitable for automatic duplex printing on the Quality &
Media sheet on the Print dialog.
Note
Manual duplex printing is not available.
Page top