Canon PIXMA MG4200 Series On-Screen Manual page 903

- Cannot print the specified PDF
file. An error has occurred while
scanning the file, or the format is
not supported, or the file is too
large.
- The specified PDF file contains
unprintable data. Some portions
may not be printed.
1702 The ink absorber is almost full.
1704
Select
1712
Contact the service center.
1714
5B02 Printer error has occurred.
Contact the service center.
5B04
5B12
5B14
2700 Timeout error has occurred.
- Failed to scan head alignment
sheet.
Check orientation/position and
check that platen/sheet is clean.
<See manual>
PDF file which contain lot of graphics or hi-
resolution images may lose that data or stop before
printing is completed. In this case, print from the
computer.
The ink absorber is almost full.
Press the machine's OK button to continue printing.
to continue printing.
Contact the service center.
The machine error has occurred.
Contact the service center.
Some errors occurred while copying and a certain
time passed.
Press the OK button to dismiss the error, and try to
copy again.
Scanning the print head alignment sheet has failed.
Press the OK button to dismiss the error, then take
the actions described below.
LCD.
Make sure the PDF file is printable from a
memory card. See Printing Documents (PDF
File) Saved on a Memory Card
information.
Note
The names of the PDF files are displayed
even though they cannot be printed from
the memory card. It is recommended you
confirm whether they are printable. If one
of the following conditions applies to the
PDF files, they are not printable.
The Details screen is not displayed
for the PDF file you want to print.
Characters other than machine name,
IJ Scan Utility, or My Image Garden
are displayed on Created with on the
Details screen.
"?" is displayed on the preview
screen.
Data edited or processed on a computer must
be printed from the computer.
Make sure that the print head alignment sheet
is set in the correct position and orientation on
the platen glass.
Make sure the platen glass and the print head
alignment sheet are not dirty.
Make sure the type and size of loaded paper is
suitable for Automatic Print Head Alignment.
For Automatic Print Head Alignment, always
load one sheet of A4 or Letter-sized plain
paper.
Make sure if print head nozzles are clogged.
Print the nozzle check pattern to check the
for more